Meridian America 541 Manuel D’Utilisation

To connect to Meridian 600 or 200
Series equipment

If your system includes any Meridian 600 or 200 Series units,

with 600 COMMS or 200 COMMS sockets, you should set all

the 500 Series units to 200 COMMS operation using the

following procedure:

●

Turn off the control unit, using the power switch on the back

panel.

●

Turn on the power again while holding down the Off key on

the front panel.

The display will show the current

Type setting:

Type    1

●

Press 

A and V on the front panel to change the Type setting

to Type 2.

The display will show:

Type    2

●

Switch the power off and on again to restore the control unit

to normal operation.

●

Configure the Meridian System Remote for 601 operation; see

the Meridian System Remote User Guide for details.

●

To return to 500 COMMS operation repeat the above

procedure, and select any type apart from Type 2. For more

What next?

Congratulations – your 541 Surround Controller is now set up

music and cinema sources.