Meridian Audio Digital Surround Controller G61 Manuel D’Utilisation

C o n f i g u r i n g   t h e  

d i g i t a l   s u r r o u n d  

c o n t r o l l e r

1 8

Stage 2:  Configuring  speakers

The Speakers configuration stage allows you to set up the digital 

surround controller for the particular arrangement of loudspeakers 

in your system.

Either:

• Press  Next after

 resetting the product; see page 16.

Or:

• Press  Wizard; see page 15.

• Press  Skip to skip past the Reset settings menu.

The display shows the title screen for stage 2:

 Skip

Back

Enter

 2: Select speakers

Press More for help

• Press  Enter to proceed or Skip to go to stage 3.

The display shows the first speaker configuration option:

 öõú

 óòô 

Back

Next

Number of Subwoofers:

one

• Press  Next or Back to step between options.

A description of each option is shown on the top line of the 

display, and its current value is shown below this to the right.

The options are summarised in the table on the next page.

• Press 

A or V to step between the alternative values for the 

option.

When you have stepped through all the speaker options the display 

shows:

Back

Next

Speaker choice finished. 

Either:

• Press  Next on the last option of the last speaker to proceed to 

configuring sources, as described in the next section.

Or:

• Press  On/Off to return to standby.

If you press On/Off before completing the configuration a warning 

is displayed, giving you the option of continuing or abandoning the 

configuration.