Mamiya RZ67 PRO II Manuel D’Utilisation

 

 

 

 

Select the shutter speed desired and rotate 

the Shutter speed Dial until the appropriate fig-
ure is aligned with the shutter speed index 
mark. Usually, the Shutter Speed Dial must be 

set to a click-stop position. However, it can 
also beset to an intermediate speed. The nu-
merals as they appear on the dial and the 

shutter speeds they represent are shown in 
the following table. When the Shutter Speed 
Dial is set to "B"(bulb), the shutter will remain 

open as long as pressure is applied to the 
Shutter Release Button and will close as soon 
as pressure is released. The AEF mark which 

appears on the Shutter Speed Dial is the 
setting for the AE Finder. 

When set at this position, the dial locks in 

place. To unlock it, rotate the dial while de-
pressing the Lock Release Button which ap-
pears in the center of the dial. The RBL mark 

on the dial is setting for taking photos using 
the RB67 lenses. In other positions the shutter 
release button will not released. 

To set the diaphragm to a desired aper-

ture, rotate the Aperture Ring until the ap-
propriate figure is aligned with the central 
index line. It is perfectly acceptable to use 

the Aperture Ring at in-between click-stop 
settings. When the Shutter Release Button 
is depressed, the diaphragm will automati-

cally stop down to the preselected aperture 
before the shutter opens for the exposure. 

As stated before, the camera speed dial 
must set to RBL and the shutter speed on 
the lens. In addition you must consider that 

the flange focal distance on RB lenses is 
111 mm and on RZ lenses 104 mm. There-
fore with RB lenses the bellows must be 

moved forward by 7 mm to focus on infinity. 
The distance scales cannot be used. Shut-
ter release is identical to RZ lens operation. 

21