Johnson Controls IFC-640 Manuel D’Utilisation

JCI-6856:A • 12/01/06 — Page 1 of 9

JCI-6856:A

As a stand-alone small-to-large system, or as a large network,
the IFC-640 meets virtually every application requirement.

Designed with modularity and for ease of system planning, the
IFC-640 can be configured with just a few devices for small
building applications, or for a large campus or high-rise applica-
tion. Simply add additional peripheral equipment to suit the
application.

•

One, expandable to two, isolated intelligent Signaling Line
Circuit (SLC) Style 4, 6 or 7.

•

Up to 159 detectors (any mix of ion, photo, thermal, or multi-
sensor) and 159 modules (N.O. manual stations, two-wire
smoke, notification, or relay) per SLC. 318 devices per loop/
636 per FACP or network node.

•

Standard 80-character display, 640-character large display,
or display-less (a node on a network).

•

Network option – 103 nodes supported (IFC-640, JNCA Net-
work Annunciator, or IFW Network Control Station).

•

6.0 amp switch mode power supply with four Class A/B built-
in Notification Appliance Circuits (NAC). Selectable System
Sensor strobe synchronization.

•

Built-in Alarm, Trouble, and Supervisory relays.

•

Up to 64 output circuits per FACP or network node; circuits
configurable online.

•

Autoprogramming and Walk Test reports.

•

Optional universal 636-point DACT.

•

80-character remote annunciators (up to 32).

•

EIA-485 annunciators, including custom graphics.

•

Printer interface (80-column and 40-column printers).

•

History file with 800-event capacity in nonvolatile memory,
plus separate 200-event alarm-only file.

•

Alarm Verification selection per point, with tally.

•

Autoprogramming and Walk Test reports.

•

Positive Alarm Sequence (PAS) Presignal.

•

Silence inhibit and Auto Silence timer options.

•

March time / temporal / California two-stage coding / strobe
synchronization.

•

Field-programmable on panel or on PC

•

Full QWERTY keypad.

•

Charger for up to 90 hours of standby power.

•

Non-alarm points for lower priority functions.

•

Remote ACK/Signal Silence/System Reset/Drill via monitor
modules.

•

Automatic time control functions, with holiday exceptions.

•

Surface Mount Technology (SMT) electronics.

•

Extensive, built-in transient protection.

•

Powerful Boolean logic equations.

•

Backlit, 640-character display.

•

Supports SCS Series smoke control system in both HVAC or
FSCS modes .

•

Printer and CRT EIA-232 ports.

•

EIA-485 annunciator and terminal mode ports.

•

Alarm, Trouble, Supervisory, and Security relays.

•

Poll 318 devices in less than two seconds.

•

Activate up to 159 outputs in less than five seconds.

•

Multicolor LEDs blink device address during Walk Test.

•

Fully digital, high-precision protocol (U.S. Patent 5,539,389).

•

Manual sensitivity adjustment — nine levels.

•

Pre-alarm AWACS — nine levels.

•

Day/Night automatic sensitivity adjustment.

•

Sensitivity windows:

– Ion  –  0.5 to 2.5%/foot obscuration.
– Photo  –  0.5 to 2.35%/foot obscuration.

– Laser (VIEW®) – 0.02 to 2.0%/foot obscuration.

– Acclimate    –    0.5 to 4.0%/foot obscuration.

– HARSH™  –  0.5 to 2.35%/foot obscuration.

•

Drift compensation (U.S. Patent 5,764,142).

•

Degraded mode — in the unlikely event that the JCPU-640
microprocessor fails, FlashScan® detectors revert to
degraded operation and can activate the JCPU-640 NAC cir-
cuits and alarm relay. Each of the four built-in panel circuits
includes a Disable/Enable switch for this feature.