Lucent Technologies Window SLV 9124 Manuel D’Utilisation

User Interface and Basic Operation

9124-A2-LB20-00

March 2000

Start a session using one of the following methods:

H

Telnet session via:

— An in-band management channel through the frame relay network.

— A local in-band management channel configured on the DTE port

between the FrameSaver unit and the router.

H

Dial-in connection using the internal modem.

H

Direct terminal connection over the COM port.

When logging on, the User Interface Idle screen appears.

H

appears (see page 2-4). You can begin your session.

H

If security was set up and is enabled, you are prompted for a login. Enter
your login ID and password.

When the user interface has been idle, a session is automatically ended and the
screen goes blank when the unit times out. Press Enter to reactivate the
interface.

"

To log in when security is being enforced:

1. Type your assigned Login ID and press Enter.

2. Type your Password and press Enter.

— Valid characters – All printable ASCII characters

— Number of characters – Up to 10 characters can be entered in the

Login ID and Password fields

— Case-sensitive – Yes

An asterisk ( * ) appears in the password field for each character entered.