Lucent Technologies Definity Enterprise Communication Server 8.2 Manuel D’Utilisation
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Features and technical reference
1227
Call Detail Recording
20
Privacy
CDR Privacy allows you to administer the system to blank a given number of
dialed digits from a CDR report. This is useful when it is necessary to know
details of a person’s calls for accounting purposes, but it is not necessary or
desirable to know the exact number called.
dialed digits from a CDR report. This is useful when it is necessary to know
details of a person’s calls for accounting purposes, but it is not necessary or
desirable to know the exact number called.
You can administer the number of digits to hide, up to 7. The value in Privacy
Digits to Hide determines how many digits do not appear on the call record. This
parameter is system-wide. Whether or not an individual’s calls receive Privacy
treatment is determined by the CDR Privacy field on the Station form.
Digits to Hide determines how many digits do not appear on the call record. This
parameter is system-wide. Whether or not an individual’s calls receive Privacy
treatment is determined by the CDR Privacy field on the Station form.
When an adjunct-originated call is made on behalf of a hunt group and the CDR
system parameter option is set to
system parameter option is set to
group-ext
, then CDR privacy does not apply. If
this field is set to
member-ext
, privacy does apply.
NOTE:
Certain countries have requirements that a certain number of digits must be
blanked from every call. Also, certain report processors do not support this
option.
blanked from every call. Also, certain report processors do not support this
option.
CDR output
If your system uses two CDR output formats, one is administered as the primary
CDR output format; the other is administered as the secondary CDR output
format. The secondary output format is typically used for a local storage format
(CDRU) to provide CDR data to NCOSS for assessing network performance or
helping to find network problems.
CDR output format; the other is administered as the secondary CDR output
format. The secondary output format is typically used for a local storage format
(CDRU) to provide CDR data to NCOSS for assessing network performance or
helping to find network problems.
The primary and secondary ports work independently. Each port will work even if
the link to the other port is down. If a link is down for more than a minute, some
data may be lost. However, the most recent 500 (Release 5vs/si/csi and later), or
1,900 (Release 5r and later) records are stored for the primary port even when a
loss of records occurs. When the link comes back up, these records are output on a
first-in, first-out basis.
the link to the other port is down. If a link is down for more than a minute, some
data may be lost. However, the most recent 500 (Release 5vs/si/csi and later), or
1,900 (Release 5r and later) records are stored for the primary port even when a
loss of records occurs. When the link comes back up, these records are output on a
first-in, first-out basis.
If the CDR buffer is full, you can select a call record handling option to determine
which of the following occurs:
which of the following occurs:
■
Calls are blocked with a reorder tone
■
Overwrite old CDR records with new ones
■
Calls are routed to an attendant as non-CDR calls