LSI SAS6160 Manuel D’Utilisation

Page 68

LSI Corporation 

September 2010

LSISAS6160 SAS Switch User Guide

Chapter 4: SAS Domain Manager Command Line Interface

Sample Output for Show Com-

mand

             Device Phys: 32-33-34-35

      Parent SAS Address: 500062b10000127f

             Parent Phys: 16-17-18-19

   Vendor Specific (hex): 00 00 00 00 00 00 00 00

 Vendor Specific (ASCII):

- Environmentals Information -

             Last Update: Time Not Supported

        Chip Temperature: OK, 68 Celsius

       Board Temperature: OK, 44 Celsius

             Astek-Brann: OK

                Expander: OK

   J1:Interconnect 32-35: OK, SAS Mini 4i Plug

         J2:Uplink 24-27: OK, SAS Mini 4i Plug

         J3:Drives 20-23: OK, SAS Mini 4i Plug

         J4:Drives 16-19: OK, SAS Mini 4i Plug

         J5:Drives 12-15: OK, SAS Mini 4i Plug

   J6:Interconnect 28-31: OK, SAS Mini 4i Plug

         J7:Drives 00-03: OK, SAS Mini 4i Plug

         J8:Drives 04-07: OK, SAS Mini 4i Plug

         J9:Drives 08-11: OK, SAS Mini 4i Plug

Overlay Name                 Id  Domain Access Point

---------------------------- --- ---------------------------------------------

(Domain)                     1   SAS6160 (500062b10000417f)

Note: (Name) denotes focused domain

      [Name] denotes domain overlays currently not bound to a physical domain

NOTE: In the following example, T = Table, S = Subtractive, and D = Direct.

Notes:

  - RA   - Routing Attributes

  - VP   - Virtual PHY

  - LS/S - Link Speed/Status:  1.5|3.0|6.0 Gb/s

                              - phy enabled but link uninitialized

                              * phy disabled

  - ZG   - Zone Grp

    Zoning Active:  Zone Group Number

    Zoning Inactive:  * phy may be assigned to a zone group

                      - phy may not be assigned to a zone group

  - Capabilities

     1xxxxxxxx - Attached SMP Initiator