Logitech 930-000011 Manuel D’Utilisation



Logitech®

Unbalanced Analog 

Outputs

Optical 

TOSLINK

Coax 

S/PDIF

BNC

S/PDIF

AES/EBU 

Balanced

Antenna 

Connectors

Digital Inputs

Balanced 

Analog 

Outputs

Optical

Coax 

S/PDIF

BNC

S/PDIF

AES/EBU 

Balanced

Word 

Clock 

Input

Infrared 

Input    Output

Ethernet

RS-232 

Serial

AC Power

1.  Connect an output from the Transporter to your stereo amplifier, preamp, or receiver 

with the appropriate interconnect. 

   The most common connection uses the unbalanced analog output red and white 

RCA connectors to connect to a line-level input, such as a CD or TAPE input. (Note: 
Transporter’s outputs are not compatible with PHONO inputs.) More details about 
Transporter’s audio connections are available in the Audio Connections section.

2.  If you are using an ethernet network connection with your Transporter, connect an 

ethernet cable from your hub or switch to Transporter.  Otherwise, screw the included 
wireless antennae to the two gold antenna connectors on Transporter.

3.  Put the two AA batteries into the remote control.

4.  Connect the included power cable to Transporter and plug it in.

 

You can leave Transporter plugged in all the time. When not in use, it enters standby 
mode and dims the display. You can also dim the display by pressing the 

 

button on the remote or front panel.