Logic Controls LK7000 Manuel D’Utilisation
3
HARDWARE CONNECTIONS
The
LK7000
can be connected to an IBM101 PC, XT, AT or clone
computer, PS/2 computer, or computer terminal. The following diagram
shows how the
shows how the
keyboard
connects to the computer and standard
keyboard or other keyboard peripheral (magnetic stripe reader, scanner,
etc.).
etc.).
NOTE:
Before making any connections it is always advisable to
turn off the computer.
turn off the computer.
A. Connecting the
LK7000
to an IBM101 PC, XT, AT, or clone
computer’s keyboard port:
1.
Use the computer interface cable. Plug the AT or PS/2 Male
connector plug into the compter. Connect the RJ11 connector into
the “To Computer” connector on the
connector plug into the compter. Connect the RJ11 connector into
the “To Computer” connector on the
LK7000
.
2.
Connect the keyboard interface cable to the standard keyboard. The
PS/2 Female connector plugs into the PS/2 connector on the rear
panel of the
PS/2 Female connector plugs into the PS/2 connector on the rear
panel of the
LK7000
. The RJ11 connector plugs into the “To
Peripheral” connector on the back of the
LK7000.
To
Computer
Reserved
for optional
MSR
To
Peripheral