Linn AV Loudspeaker Manuel D’Utilisation

To enable the remote sense on the second AV 5150 in the daisy chain,

remove the link between the FILTER OUTPUT and POWER AMP INPUT

and add a link between the RIGHT INPUT and POWER AMP OUTPUT, as

shown in the diagram opposite.

Additional wiring to the AV 5150

With some video sources there may be inadequate signal present on the

subwoofer output of the surround processor to switch on the AV 5150.

This manifests itself by the AV 5150 repeatedly switching to standby, for

example during long periods of dialogue. To prevent this happening take

a second feed from the centre channel output of the surround processor

and connect it to the left input of the AV 5150. This will trigger the signal

detection circuitry from either subwoofer signal or centre channel signal.

27