Lexicon PCM92 Manuel D’Utilisation

KEEP THESE INSTRUCTIONS

HEED ALL WARNINGS

FOLLOW ALL INSTRUCTIONS

THE APPARATUS SHALL NOT bE ExPOSED 

TO DRIPPING OR SPLASHING LIqUID AND 

NO ObjECT FILLED WITHI LIqUID, SUCH AS 

vASES, SHALL bE PLACED ON THE APPARA-

TUS.

CLEAN ONLY WITH A DRY CLOTH.

DO NOT bLOCK ANY OF THE vENTILATION 

OPENINGS. INSTALL IN ACCORDANCE 

WITH THE MANUFACTURER’S INSTRUC-

TIONS.

DO NOT INSTALL NEAR ANY HEAT SOURC-

ES SUCH AS RADIATORS, HEAT REGISTERS, 

STOvES, OR OTHER APPARATUS (INCLUD-

ING AMPLIFIERS) THAT PRODUCE HEAT.

ONLY USE ATTACHMENTS/ACCESSORIES 

SPECIFIED bY THE MANUFACTURER.

UNPLUG THIS APPARATUS DURING LIGHT-

NING STORMS OR WHEN UNUSED FOR 

LONG PERIODS OF TIME.

Do not defeat the safety purpose of the polar-

ized or grounding-type plug.  A polarized plug 

has two blades with one wider than the other.  A 

grounding type plug has two blades and a third 

grounding prong.  The wide blade or third prong 

are provided for your safety.  If the provided plug 

does not fit your outlet, consult an electrician 

for replacement of the obsolete outlet.

Protect the power cord from being walked on 

or pinched particularly at plugs, convenience 

receptacles, and the point where they exit from 

the apparatus.

Use only with the cart stand, tripod bracket, or 

table specified by the manufacture, or sold with 

the apparatus.  When a cart is used, use caution 

when moving the cart/apparatus combination to 

avoid injury from tip-over.

Refer all servicing to qualified service personnel.  

Servicing is required when the apparatus has 

been damaged in any way, such as power-supply 

cord or plug is damaged, liquid has been spilled 

or objects have fallen into the apparatus, the 

apparatus has been exposed to rain or moisture, 

does not operate normally, or has been dropped.

POWER ON/OFF SWITCH: If the equipment 

has a Power switch, the Power switch used in 

this piece of equipment DOES NOT break the 

connection from the mains.

MAINS DISCONNECT:  The plug shall remain 

readily operable.  For rack-mount or installation 

where plug is not accessible, an all-pole mains 

switch with a contact separation of at least 3 

mm in each pole shall be incorporated into the 

electrical installation of the rack or building.

FOR UNITS EqUIPPED WITH ExTERNALLY 

ACCESSIbLE FUSE RECEPTACLE:    Replace fuse 

with same type and rating only.

MULTIPLE-INPUT vOLTAGE: This equipment 

may require the use of a different line cord, 

attachment plug, or both, depending on the avail-

able power source at installation. Connect this 

equipment only to the power source indicated 

on the equipment rear panel. To reduce the risk 

of fire or electric shock, refer servicing to quali-

fied service personnel or equivalent.

If connected to 240v supply, a suitable CSA/UL 

certified power cord shall be used for this supply.

Notice For customers iF Your uNit is equipped With A poWer cord.
WArNiNG: this AppLiANce shALL  Be  coNNected  to  A  mAiNs  socKet 

outLet With A protectiVe eArthiNG coNNectioN.
the cores in the mains lead are coloured in accordance with the following code:
GREEN and YELLOW - Earth        BLUE - Neutral        BROWN - Live
As colours of the cores in the mains lead of this appliance may not cor-

respond with the coloured markings identifying the terminals in your plug, 

proceed as follows:

•

  the core which is coloured green and yellow must be connected to the 

terminal in the plug marked with the letter e, or with the earth symbol, 

or coloured green, or green and yellow.

•

  the  core  which  is  coloured  blue  must  be  connected  to  the  terminal 

marked N or coloured black.

•

  the  core  which  is  coloured  brown  must  be  connected  to  the  terminal 

marked L or coloured red.

 

this equipment may require the use of a different line cord, attachment 

plug,  or  both,  depending  on  the  available  power  source  at  installation.  

if the attachment plug needs to be changed, refer servicing to qualified 

service personnel who should refer to the table below. the green/yellow 

wire shall be connected directly to the units chassis.

CONDUCTOR

WIRE COLOR

Normal

Alt

L

LIVE

BROWN

BLACK

N

NEUTRAL

BLUE

WHITE

E

EARTH GND

GREEN/YEL

GREEN

WARNING: if the ground is defeated, certain fault conditions in the unit 

or in the system to which it is connected can result in full line voltage 

between chassis and earth ground. severe injury or death can then result if 

the chassis and earth ground are touched simultaneously.