Lemur Monitors Jazzmutant Lemur Manuel D’Utilisation
The Lemur User Manual
103
7.1.3. Computers and Lemur connected to a Network
7.1.3.1.
Network with a DHCP Server
Most network sharing devices allow multiple connections and manage the attribution
of IP addresses through the DHCP protocol. These devices include WIFI/Ethernet Routers,
Airport Base Stations and ADSL/Cable Modems with routers.
Airport Base Stations and ADSL/Cable Modems with routers.
You only need to configure all your devices - including the Lemur - to use the DHCP
mode.
7.1.3.2.
Network without DHCP Server
If you have multiple devices connected through a hub or switch, you may have to
configure them individually with a unique, static IP sharing the same network mask.
Use IPs like:
192.168.0.X or 10.0.0.X
Mask:
255.255.0.0
7.1.4. Lemur Network Setup
You open the Network Settings via the Settings button, which is the left-most
hardware button on top of the Lemur.
DHCP IP Configuration:
•
Select “Automatic using DHCP”.
•
If a DHCP server is available, the Lemur will obtain a DHCP IP address automatically. If there is
no DHCP server available, the Lemur will switch to Static IP configuration.
no DHCP server available, the Lemur will switch to Static IP configuration.
Static IP Configuration: