Lemur Monitors Jazzmutant Lemur Manuel D’Utilisation
The Lemur User Manual
97
key:
Dial in the MIDI note number. If the value is a vector the second field will be extrapolated
automatically. You can always override this setting by putting in your own value.
automatically. You can always override this setting by putting in your own value.
pressure:
The Variable chosen from the Variable menu that is converted to key pressure values is
shown here.
shown here.
Scale:
Type in the desired target scaling for the MIDI messages. Possible values range from 0 to
127.
127.
Channel:
Dial in the MIDI channel. If the value is a vector the second field will be extrapolated
automatically. You can always override this setting by putting in your own value. Possible
values range from 0 to 16.
automatically. You can always override this setting by putting in your own value. Possible
values range from 0 to 16.
6.1.1.4.
B0 – Control Change
The Control Change data is used to produce pseudo-continuous data (ranging from 0
to 127).
controller:
Dial in the MIDI controller number. If the value is a vector the second field will be
extrapolated automatically. You can always override this setting by putting in your own
value. Possible values range from 0 to 127
extrapolated automatically. You can always override this setting by putting in your own
value. Possible values range from 0 to 127
value:
The Variable chosen from the Variable menu that is converted to the controller values is
shown here.
shown here.
Scale:
Type in the desired target scaling for the MIDI messages. Possible values range from 0 to
127.
127.
Channel:
Dial in the MIDI channel. If the value is a vector the second field will be extrapolated
automatically. Possible values range from 0 to 16.
automatically. Possible values range from 0 to 16.
6.1.1.5.
C0 – Program Change
Used to change the patch number of synthesizers.