Leica TPS - System 1000 1000Z01 Manuel D’Utilisation
12
TPS-System 1000 Programs-2.3.1en
© Leica
IN
project.
All installation programs and applications are supplied
on normal 3 1/2" diskettes.
All installation programs and applications are supplied
on normal 3 1/2" diskettes.
For optimal use of the programs and instruments read
this manual carefully.
this manual carefully.
The hardware and software used to transfer the
individual program packages must meet the following
requirements:
• IBM-compatible PC, 386 or higher
• 4 MB RAM
• 3.5" floppy-disk drive
• RS 232 interface, including interface cable for Leica
individual program packages must meet the following
requirements:
• IBM-compatible PC, 386 or higher
• 4 MB RAM
• 3.5" floppy-disk drive
• RS 232 interface, including interface cable for Leica
survey instruments (stock no. 563625)
• MS DOS 5.0 or higher
• MS Windows 3.1
• MS Windows 3.1
Four diskettes are supplied with each instrument:
• disk 1 = SYSTEM FIRMWARE
• disk 2 = Programs and Languages
• disk 3 = TPS-WORKBENCH
• disk 4 = RCS 1000
• disk 1 = SYSTEM FIRMWARE
• disk 2 = Programs and Languages
• disk 3 = TPS-WORKBENCH
• disk 4 = RCS 1000
More information can be found in the file
README.TXT on each diskette.
README.TXT on each diskette.
Recommended installation procedure:
1. TPS-WORKBENCH (disk 3)
2. SYSTEM FIRMWARE (disk 1)
3. Programs and languages (disk 2)
4. RCS 1000 (disk 4)
2. SYSTEM FIRMWARE (disk 1)
3. Programs and languages (disk 2)
4. RCS 1000 (disk 4)
Hardware and software
required
required
Installation in the PC