Leica TPS - System 1000 1000Z01 Manuel D’Utilisation
© Leica
TPS-System 1000 Programs-2.3.1en
127
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
AR
Log File
If "Log File" is set to ON the measurements and the
results are stored in the ASCII-file specified within the
"Configuration Editor". This file is created in the
directory LOG on the memory card. Subsequently, you
can read the memory card on your PC and obtain a hard
copy of the Log-file.
results are stored in the ASCII-file specified within the
"Configuration Editor". This file is created in the
directory LOG on the memory card. Subsequently, you
can read the memory card on your PC and obtain a hard
copy of the Log-file.
Data will always be appended to the specified Log-file.
The Log-file contains the following information:
Header
The header line will contain the
program used, information about the
instrument, the name of the data file as
well as date and time.
program used, information about the
instrument, the name of the data file as
well as date and time.
Record
For each section of the area, start
point and end point, horizontal
distance and azimuth are stored.
point and end point, horizontal
distance and azimuth are stored.
For arcs with 2 points and radius the
azimuth of arc, radius and length of
arc are also stored.
azimuth of arc, radius and length of
arc are also stored.
For 3 point arcs the direction of arc,
radius and length of arc are also
stored.
radius and length of arc are also
stored.