Leica TPS - System 1000 1000Z01 Manuel D’Utilisation

TPS-System 1000 Programs-2.3.1en

© Leica

If "Log File" is set to ON the measurements and the
results are stored in the ASCII-file specified within the
"Configuration Editor". This file is created in the
directory LOG on the memory card. Subsequently, you
can read the memory card on your PC and obtain a hard
copy of the Log-file.

Data will always be appended to the specified Log-file.

The Log-file contains the following information:

includes:
-  the program used,
- information about the instrument,
- the file to store the measurement

data,

- the date and the time.

the name of the input files for:
- the Hz-alignment,
- the V-alignment and
- the transverse section.

- Instrument station with coordinates

and instrument height.

- Stakeout point with chainage,
- offset

1

 and height displacement

2

relative to centre line,

- comparison values from planning,

and associated differences.

For the alignment inspection,
- the coordinates of the point

measured are stored along with

- the associated station,
- the offset and
- the height difference.