Leica TPS - System 1000 1000Z01 Manuel D’Utilisation
© Leica
TPS-System 1000 Programs-2.3.1en
291
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
PZ
LB
TB
CO
RP
Data Formats
The following describes the format and contents of the
data stored for alignments and cross-sections in the
RoadPlus program. All files are in GSI format and must
be located in the \GSI directory of the memory card.
data stored for alignments and cross-sections in the
RoadPlus program. All files are in GSI format and must
be located in the \GSI directory of the memory card.
The following geometric elements are supported:
Horizontal Alignment
Element
Definition
Declaration in the
alignment file
alignment file
Tangent
Coordinates (X,Y) to Coordinates (X,Y)
"STRAIGHT"
Circular curve
Beginning of arc (X,Y), Radius,
"000CURVE"
End of arc (X,Y);
End of arc (X,Y);
Spiral In
Beginning of curve (X,Y), A-Parameter /
"00SPIRIN"
Length of curve + Radius,
End of curve (X,Y);
End of curve (X,Y);
Spiral out
Beginning of curve (X,Y), A-Parameter /
"0SPIROUT"
Length of curve + Radius,
End of curve (X,Y);
End of curve (X,Y);
Compound
Beginning of curve (X, Y), Radius 1,
"0CURVEIN"
curve in
Radius 2
Compound
Beginning of curve (X, Y), Radius 1,
"CURVEOUT"
curve out
Radius 2
End of Project
Coordinates (X,Y)
"00000EOP"
Header of the Horizontal Alignment File:
41....+000JOBID 42....+HZALIGNM 43......+STACOORD
WI 41
Job-Identification. Max. 8 ASCII-characters,
may be defined by user.
WI 42
Identification of Horizontal Alignment file.
May not be changed by user.
WI 43
Identification of principal point type file. May
not be changed by user.