Leica GPS1200+ Manuel D’Utilisation
60
Operation
3.7
Operation with a Typical Configuration Set
)
The example given is for static operations.
Static operations
step-by-step
step-by-step
Step
Description
1.
Set up the equipment.
)
Always fill out a field record sheet for each point.
)
It is vital that the antenna height is measured correctly. Measure the height
at the beginning and at the end of the occupation.
at the beginning and at the end of the occupation.
)
The Satellite Settings of the GX1230+ GNSS accomodates three addi-
tional fields: <GLONASS:> (selection Yes or No), <Galileo:> (selection
Yes
tional fields: <GLONASS:> (selection Yes or No), <Galileo:> (selection
Yes
or No) and <GPS L5:> (selection Yes or No).
2.
Start the Survey application program.
3.
SURVEY Survey Begin
<Job: Default>
<Coord System: WGS 1984>
<Codelist: <None>>
<Config Set:>
Select a configuration set for static operations.