Laser PW-DD100W Manuel D’Utilisation

Thank you for purchasing the Universal Auto/Air Adapter. This adapter 
now makes it safe and easy to power and recharge your NOTEbook 
computer from any standard 12 Volt DC cigarette lighter while 
traveling by car, boat, RV. It also works in planes that have been 

 

equipped with in-flight, in-seat power receptacles. Check with your 
airline to determine availability.

Included with this User's Guide, Auto/Air Adapter, PowerTips, in-flight
Connector and in-car Connector.

In-Car/Boat/RV

1.  Remove the vehicle's cigarette lighter and insert the Auto/Air 
     Adapter's cigarette lighter plug into the socket.

2.  Turn-on your vehicle's ignition.

NOTE: Power to the cigarette lighter in some vehicles is always on and 
may not require the ignition to be turned on.

The LED on the adapter will illuminate green. This indicates that power 
is available. If the LED does not illuminate, check all connections. 

NOTE: The vehicle may also need to be running in order to get power.
If you continue to not see the indicator light working, you may need to
check the vehicle's cigarette lighter fuse and/or the in-car cigarette
adapter fuse. Refer to your vehicle manual for further direction on 
how to properly check a car fuse.   

NOTE:  The fuse from the in-car cigarette adapter can be easily 
removed by unscrewing the black round disc located at the tip of the 
adapter and removing the fuse. Replace the fuse with one of the exact 
same specifications at any local hardware or mechanic store.

If you still have difficulty obtaining power after performing the above 
operations, please contact our customer service team for a 
replacement unit.

3.  Take the Auto/Air Adapter with your computer PowerTip together to 
     plug into the power socket on your NOTEbook computer.

4.  Turn-on your computer to begin working or to begin charging your 
      battery. 

CAUTION: It is not recommended to have the Auto/Air Adapter 
plugged into your computer when starting the engine. The power may 
be interrupted and this will cause your system to be reset.

CAUTION: Avoid touching the Auto/Air Adapter during use, as it may 
get warm. This is normal. Avoid placing the adapter in direct sunlight 
or next to heat-sensitive materials.

In-Flight/Airline

NOTE: Although most airlines use the in-flight connector for in-flight 
use, some airlines such as American use the cigarette adapter. In this 
case follow the operation instructions for in-car directions of the 
previous section.

1.  To uncover the in-flight connector, first remove the in-car connection. 
     To remove, push down on the black button located above the green 
     LED indicator. As you push down on the tab, pull the cigarette plug 
     apart to reveal the in-flight connector. 

On most airlines, the seat socket where the in-flight adapter is to be 
inserted is located in the arm of your seat, in the same location you 
use to plug-in headphones, or under the seat. Please ask the flight 
attendant for assistance locating this socket. 

Locate your device in attached compatibility chart and select the 
corresponding PowerTip for your device. 

WARNING: Choose the correct PowerTip for your device.  Choosing the 
incorrect PowerTip may damage your computer or cause it to malfunction.
 
After selecting the correct PowerTip for your device follow the 
instructions below for proper operation.

1.Connect the correct PowerTip to the DC-DC Adapter (PW-DD100W). 

2.Plug the PowerTip into your device.

NOTE: If the PowerTips you need is not included, and/or you would like to
purchase additional PowerTips, please contact our Customer Service.

-1-

Power Tips                          

** A package of 

                                                          

LED Indicator

                                                             

In-Flight            
Connector        

Cigarette 
Lighter plug 

DC-DC Adapter            

                                             PW-DD100W                          

If the LED on the adapter does not illuminate, first check to see if the 
plug is properly inserted.