Lancom Systems LCOS 3.50 Manuel D’Utilisation
Chapter 7: Routing and WAN connections
LANCOM Reference Manual LCOS 3.50
89
Routing and
W
A
N
con
n
ections
When starting a new entry under WEBconfig, the NAT table shows up as fol-
lows:
lows:
7.5
Configuration of remote stations
Remote stations are configured in two tables:
In the name list(s) all information is set that applies individually to only
one remote station.
one remote station.
Parameters for the lower protocol levels (below IP or IPX) are defined in
the communication layer table.
the communication layer table.
The configuration of the authentication (protocol, user name, pass-
word) is not covered in this section.Information on authentication is
contained in the section ’Establishing connection with PPP’
word) is not covered in this section.Information on authentication is
contained in the section ’Establishing connection with PPP’
7.5.1
Name list
The available remote stations are created in the name list with a suitable name
and additional parameters.
and additional parameters.
Configuration tool
Menu/table
LANconfig
Communication
Remote sites
Name list
WEBconfig
Expert configuration
Setup
WAN module
Name-list
Terminal/Telnet
cd /Setup/WAN module
set name list[...]
set name list[...]