IntraServer Technology ITI-90-100250 Manuel D’Utilisation

The following tests are available to help identify problems when the system
containing the IntraServer ITI-8241C-S adapter does not boot.

The FCode selftest is added to the device tree during the probing phase of the
OpenBoot™ PROM start-up sequence.  You can invoke the FCode selftest
diagnostics by using the OpenBoot™ user interface test or test-all
commands.  If you encounter an error while running the diagnostics,
appropriate messages will be displayed.  Refer to the OpenBoot™ 3.X
Command reference Manual for more information on the test and test-all
commands.

The  selftest  exercises most functionality of the adapter and checks for the
following conditions:

•

 

Isolates faulty devices

•

 

Checks that no hardware fault exists

•

 

Checks connectivity during adapter card installation

•

 

Verifies that all components are functional

Use the following example to run selftest using the test command:

ok setenv diag-switch? true
ok test <device-path>

Hme register test --- succeeded.
Internal loopback test -- succeeded.
Transceiver check  -- Using Onboard Transceiver - Link Up.
passed
ok