Inova GigaHub PD008310103.001 AB Manuel D’Utilisation
©2002 Inova Computers GmbH
Page 1-5
Doc. PD008310103.001
GigaPACK
Getting Started
1
GigaPACK
Use the included 1.5m length of USB A-B cable to connect the PCs external USB to the
GigaCHAMPION face-plate. Ensure that the bank of switches on SW1 are correctly set - Switch 2
‘ON’ is the default setting and configures the remotely connected display as the boot monitor.
GigaCHAMPION face-plate. Ensure that the bank of switches on SW1 are correctly set - Switch 2
‘ON’ is the default setting and configures the remotely connected display as the boot monitor.
SCREW
INOVA GigaCHAMPION™
VIDEO CARD
VIDEO CARD
5
DISPLAY CABLE
9-PIN D-DUB
TO GigaHUB
15-PIN D-DUB
TO LOCAL VGA
Now replace the PCI board fixing screw and the computer cover.
The Inova GigaCHAMPION has a local analog VGA connector and one high-speed serial GigaST
)
R
interface (9-pin D-Sub). Connect a local VGA monitor (if required) to the video output and the
20
20
+
m length of twisted-pair cable that links the GigaHUB to the GigaCHAMPION to the remaining
D-Sub connector. Finally, you are ready to attach the power cord and proceed with the software
installation of the supplied Inova driver.
installation of the supplied Inova driver.
6