Infocus PN-L702B Manuel D’Utilisation
Page 24
PIP/PbyP Menu
PIP MODES: Sets the display method of the PC and AV input signals.
PIP
1
2
A secondary image is displayed inside
the main image.
the main image.
PBYP
1
2
The main image and the secondary im-
age are displayed side by side.
age are displayed side by side.
PBYP2
1
2
The main image uses 1280 pixels across
the screen and the secondary image is
displayed next to the main image.
the screen and the secondary image is
displayed next to the main image.
PIP SIZE: Sets the size of the secondary PIP image.
PIP H-POS: Adjusts the horizontal position of the secondary PIP image.
PIP V-POS: Adjusts the vertical position of the secondary PIP image.
PIP BLEND: In PIP mode, use this menu item to display the secondary PIP image transparently.
SOUND CHANGE: Sets the sound which is output in PIP, PbyP, or PbyP2 mode. If the main PIP image is displayed as a full screen
using the AUTO OFF function, the sound for the main PIP image is output even when the sound for the secondary PIP image is speci-
fied.
MAIN POS: Sets the position of the main PIP image in PbyP or PbyP2 mode.
PBYP2 POS: Sets the position of the secondary PIP image in PbyP2 mode.
AUTO OFF: Sets the display method when no signals for the secondary PIP image are input in PIP, PbyP or PbyP2 mode.
PIP H-POS: Adjusts the horizontal position of the secondary PIP image.
PIP V-POS: Adjusts the vertical position of the secondary PIP image.
PIP BLEND: In PIP mode, use this menu item to display the secondary PIP image transparently.
SOUND CHANGE: Sets the sound which is output in PIP, PbyP, or PbyP2 mode. If the main PIP image is displayed as a full screen
using the AUTO OFF function, the sound for the main PIP image is output even when the sound for the secondary PIP image is speci-
fied.
MAIN POS: Sets the position of the main PIP image in PbyP or PbyP2 mode.
PBYP2 POS: Sets the position of the secondary PIP image in PbyP2 mode.
AUTO OFF: Sets the display method when no signals for the secondary PIP image are input in PIP, PbyP or PbyP2 mode.
MANUAL - Displays a main PIP image and a black secondary PIP image.
AUTO - Display the main PIP image as a full screen.
AUTO - Display the main PIP image as a full screen.
NOTES:
• The currently selected input signal is displayed in the main PIP area.
• You cannot display two of the same type signals simultaneously such as two types of PC input signals or two types of AV input
• You cannot display two of the same type signals simultaneously such as two types of PC input signals or two types of AV input
signals.
• The screen size for dual-screen display is the same as the screen size for single-screen display. The Dot by Dot screen is displayed
in NORMAL size except when it is set as the PIP main screen.
• When a PIP mode is active, SCREEN MOTION and AUTO INPUT CHANGE are disabled and INPUT SELECT options cannot be se-
leted.
• When an interlaced signal (1080i, 480i, video, S-Video) is input to the sub screen, horizontal lines may flicker. If this happens,
display the image on the main screen.