IBM P96 Manuel D’Utilisation

7

adjust the horizontal centering of the
picture

adjust the vertical centering of the
picture

adjust the horizontal size of the
picture

adjust the vertical size of the picture

enlarge or reduce the picture

The SIZE/CENTER settings allow you to adjust the
picture’s size, centering, or zoom.
Once the setting is adjusted, it will be stored in memory for
the current input signal.

The MENU OSD appears.

Press the ./> buttons to select “

The SIZE/CENTER OSD appears.

Press the ./> buttons to select the item you want to
adjust.

(Horizontal Centering)

(Vertical Centering)

(Horizontal Sizing)

(Vertical Sizing)

(Zoom)

Press the ?// buttons to adjust the settings.

(Horizontal Centering)

(Vertical Centering)

(Horizontal Sizing)

(Vertical Sizing)

(Zoom)

Press the 

 button once to return to the MENU OSD, and

twice to return to normal viewing. If no buttons are pressed,
the OSD closes automatically after about 30 seconds.

To reset,  press the ? (reset) button while the OSD is on.
The selected item is reset to the factory setting.

The 

 (Zoom) adjustment stops when the horizontal or vertical

size reaches its maximum or minimum value. The horizontal
adjustment value is not displayed in the menu.

/ . . . to move the picture right
? . . . to move the picture left

/ . . . to move the picture up
? . . . to move the picture down

/ . . . to increase picture width
? . . . to decrease picture width

/ . . . to increase picture height
? . . . to decrease picture height

/ . . . to enlarge the picture
? . . . to reduce the picture

2 6

S I ZE / CENTER