IBM LXE MX5 Manuel D’Utilisation

Pocket PC 2002

 The volume is adjusted using Windows icon | Settings | 

Personal tab | Sounds & Notifications icon then select the Notifications tab. 

Note:  “Enable sounds for” must be enabled before the following key sequences 

will adjust the volume. 

To adjust speaker volume, locate the <V> key and the Blue key.  
Adjust the speaker volume by pressing the: 

• 

Blue key, then the <V> key to enter Volume change mode. 

• 

Use the Up Arrow and Down Arrow keys to adjust volume until the speaker 

volume is satisfactory. 

• 

Press the Enter key to exit this mode. 

Pocket PC 200

0 Tap the Windows icon | Settings | Personal tab | Sounds & 

Reminders icon. Then select the Volume tab.  

Pocket PC 2002

 Tap the Windows icon | Settings | Personal tab | Sounds & 

Notifications icon. Then select the Notifications tab. 
Change the setting and tap OK to save the change. You can also select / deselect 

sounds for key clicks and screen taps and whether each is loud or soft. 
Sounds specific to primary events are selected using the options on the Sounds 

tab. 
Reminder/Notifications tones are selected using the options on the 
Reminders/Notifications tab. 
As the volume scrollbar is moved between Loud and Silent, the computer beeps 

each time the volume increases or decreases in decibel range. 

Blue+V puts the MX5 in ‘Volume Adjust’ mode.   
Shift+Blue+Shift puts the unit in ‘Blue’ Mode which, when followed by ‘V’, puts 

the unit in ‘Volume Adjust’ mode as well.   
If the MX5 is responding to touch input, but does not respond to keypad (hard or 

soft) input, the MX5 may still be in Volume Adjust mode.  
Press Enter to cancel (exit) Volume Adjust mode. After pressing enter, the MX5 

should start responding to key input.