Honeywell HJZTPX Manuel D’Utilisation
Rev. 1.01
42
900.0570
8-Sept-05
8.6 PRESHOTS
When using Maxpro mode, there are several PreShots (views or presets) reserved for
controlling and programming the scan. Refer to Table 1 for a listing of the
preprogrammed PreShots and their functions.
controlling and programming the scan. Refer to Table 1 for a listing of the
preprogrammed PreShots and their functions.
Program PreShots as described Section 7.7 and send the KD6i/HD6i to PreShots as
described in Section 7.8.
described in Section 7.8.
The PreShots reserved for scan setup, programming, and control functions cannot be
programmed and cannot be included in VectorScans.
programmed and cannot be included in VectorScans.
Table 1:
Preprogrammed Preshots
KD6/HD6 (Maxpro Mode)
PreShot 80
Run PTZ Tour 1
PreShot 81
Run PTZ Tour 2
PreShot 82
Run PTZ Tour 3
PreShot 83
Program PTZ Tour 1
PreShot 84
Program PTZ Tour 2
PreShot 85
Program PTZ Tour 3
PreShot 86
Terminate PTZ Programming Mode
PreShot 87
Start VectorScan 1
PreShot 88
Start VectorScan 2
PreShot 89
Start VectorScan 3
PreShot 90
Setup the Scan and Camera (OSD Menus)
PreShot 91
Toggles the error table display
PreShot 92
Toggles auto exposure ON and OFF. (Factory default is ON.)
PreShot 93
Toggles backlight compensation ON and OFF. The unit must be in auto
exposure mode for backlight compensation to function.
exposure mode for backlight compensation to function.
PreShot 94
Toggles between standard operation and NightShot mode. (Camera
models 843216-1011, 843216-1013, 843216-0984, and 843216-0985 only.)
models 843216-1011, 843216-1013, 843216-0984, and 843216-0985 only.)
PreShot 95
Toggles between freeze and unfreeze video
PreShot 96
Invokes the Flashback Function
PreShot 97
Reserved
PreShot 98
Camera/Scan Reset
PreShot 99
Reserved