Honeywell VCR DCP200 Manuel D’Utilisation
DCP200 Profile Controller & Recorder - Product Manual
51-52-25-150, Issue 1 – April 2009
Electrical Installation
Page 35
Option Slot 3 - Transmitter Power Supply Module
If option slot 3 is fitted with a transmitter power supply module, make connections as
illustrated. The output is an unregulated 24V DC, 22mA supply.
illustrated. The output is an unregulated 24V DC, 22mA supply.
Figure 31.
Option Slot 3 - Transmitter Power Supply Module
Option Slot A Connections
Option Slot A Connections – Basic Auxiliary Input Module
If option slot A is fitted with a basic auxiliary input module, connect as shown. Consider using
the full auxiliary input (Option Slot B) instead, as this has additional features and leaves
option slot A free for other modules.
the full auxiliary input (Option Slot B) instead, as this has additional features and leaves
option slot A free for other modules.
Figure 32.
Option Slot A – Basic Auxiliary Input Module
Option Slot A Connections - Digital Input A Module
If a digital input module is fitted in option slot A, this may be connected to either voltage free
contacts (e.g. switch or relay), or a TTL compatible voltage. Connections are shown below.
contacts (e.g. switch or relay), or a TTL compatible voltage. Connections are shown below.
Figure 33.
Option Slot A – Digital Input A Module
Option Slot A Connections - Ethernet Communications Module
If option slot A is fitted with the Ethernet communication module, a standard RJ45 connector
is accessible from the top of case. No rear connections are required.
is accessible from the top of case. No rear connections are required.
10
11
_
12
+
16
17
_
+
16
17
_
+