Honeywell VCR DCP200 Manuel D’Utilisation

DCP200 Profile Controller & Recorder - Product Manual

Page 46

Configuration & Use

51-52-25-150, Issue 1 – April 2009

An easy Setup Wizard runs automatically at first ever power-up or if whenever a Reset To 
Defaults is carried out. Users can follow the Wizard screens to setup parameters required for 
typical applications (screens marked w in the following Screen Sequence lists are also
included in the Setup Wizard).
A partial Wizard also runs whenever option modules have been changed. The partial wizard, 
only shows parameters affected by the changes made. The Wizard can also be run manually 
from the Main Menu. Once completed, the Setup Wizard exits to Operation Mode.

Experts or users with more complex applications can select the parameters they wish to set-
up from the Configuration Menus instead of using the Wizard.

The Setup Wizard can be selected from the Main Menu.

Hold down 



and press 



from to enter the Main Menu.

Press 



or 



to select Setup Wizard.

Press 



to enter the Setup Wizard.

Note:
With the exception of the first ever power-up, entry into this mode is security-protected by the 
Setup Wizard Lock Code. Refer to the Lock Code View section for more details.

Press 



to move forward or 



to move backwards through the screens.

Press 



or 



to change the value as required.

Hold down 



and press 



to return to the Main Menu

Scrolling “Help Text” is shown at the bottom of the screens to aid navigation.

Table 6. Setup Wizard Screens

 Setup Wizard:

w Enter correct code number to access Setup Wizard.

w Press  to select each major configuration parameter in turn. Follow 

on-screen prompts to alter the values.

w Confirms completion of the Setup Wizard. Exits to Operation Mode.