Hitachi 3300MFP Manuel D’Utilisation
EN
Troubleshooting overview 193
If necessary, try plugging the power module into a different power source.
Try a different power module/cable if one is available.
After checking the items above and making any necessary changes, is the Power/Status light now
ON solid green?
ON solid green?
What is the state of the Power/Status light?
The behavior of the Power/Status light indicates the status of the print server’s power connection
and its physical connection to the network. If the Power/Status light on your print server is not ON
solid green, find its state in the list below and continue troubleshooting.
and its physical connection to the network. If the Power/Status light on your print server is not ON
solid green, find its state in the list below and continue troubleshooting.
Power/Status light OFF
If the Power/Status light is OFF, your power module may be faulty. Fixing this fault requires
assistance from HP Jetdirect technical support; see the support flyer that came with the product
for information on contacting HP.
assistance from HP Jetdirect technical support; see the support flyer that came with the product
for information on contacting HP.
Power/Status light blinking green
The Power/Status light should be ON solid green to indicate that print server power is OK and that
the network cable is connected properly to the print server. If the Power/Status light is blinking
green, please try the steps below and make changes as necessary.
the network cable is connected properly to the print server. If the Power/Status light is blinking
green, please try the steps below and make changes as necessary.
Make sure that the network cable is connected securely to the print server.
Check that the network cable is plugged securely into the hub/switch/router, and that the
connection is set to the correct network speed.
connection is set to the correct network speed.
●
Check that the LINK light is ON for the port on the hub/switch/router to which the print server is
connected.
connected.
●
Your network cable may be faulty. Try a different cable.
●
If the light still does not come on, try a different port on the hub/switch/router.
Is the Power/Status light now ON solid green?
. If no, your print server
has a problem that requires assistance from HP Jetdirect technical support; see the support flyer
that came with your product for information on contacting HP.
that came with your product for information on contacting HP.
Power/Status light blinking amber
Your print server has developed a fault. Fixing this fault requires assistance from HP Jetdirect
technical support; see the support flyer that came with your product for information on contacting
HP.
technical support; see the support flyer that came with your product for information on contacting
HP.
10/100 link OK? (10 light or 100 light ON solid green?)
The link lights, the 10 light and the 100 light, indicate whether the print server can initiate a
network link at the right speed with your hub, switch, or router. One of the link lights, either the 10
light or the 100 light, should be ON solid green (bright green in color and glowing continuously, not
blinking) to indicate a valid link with the hub/switch/router. If there is not a valid link, both the 10
and 100 lights will be off.
network link at the right speed with your hub, switch, or router. One of the link lights, either the 10
light or the 100 light, should be ON solid green (bright green in color and glowing continuously, not
blinking) to indicate a valid link with the hub/switch/router. If there is not a valid link, both the 10
and 100 lights will be off.
If one of the print server’s link lights is ON solid green, continue with
If neither of the print server’s link lights is ON solid green, or if you are not sure what to
look for, follow the instructions below to start evaluating the link status of the print server.
look for, follow the instructions below to start evaluating the link status of the print server.