Hitachi SA200 Manuel D’Utilisation
B Using the BIOS Setup Program
SA200
91
The default order of the options is: Removable Device,
CD-ROM Drive and Hard Drive
CD-ROM Drive and Hard Drive
Note: The default removable drive is the floppy drive. To change this
value, press Enter at the Removable Drive option.
value, press Enter at the Removable Drive option.
Speaker
This option enables or disables the speaker on boot-up. The
options are:
options are:
•
Enabled
•
Disabled
The default value for this field is: Enabled
Note: You can override this setting after boot-up by pressing <Fn+S>
or <Fn+End>.
or <Fn+End>.
Boot Display
The Boot Screen setting controls which screen the system uses
when you turn it on. The options are:
when you turn it on. The options are:
•
Auto
•
Both
The default value for this field is: Both
System Memory, Extended Memory, Processor Speed,
BIOS Version, VGA BIOS Version
BIOS Version, VGA BIOS Version
These fields are automatically determined by the system.
Advanced Menu
Serial Port
The Serial Port options allow you to enable and choose the COM
port settings for the serial port. If you are not planning to use the
this port, you can disable it by choosing “Disabled” to conserve
power or to assign this port to another device for example, a PC
card device).
port settings for the serial port. If you are not planning to use the
this port, you can disable it by choosing “Disabled” to conserve
power or to assign this port to another device for example, a PC
card device).
lonestar.boo : sa200.fm Page 91 Friday, March 6, 1998 10:53 AM