Hitachi SA200 Manuel D’Utilisation

Page de 138
2 Getting Started
SA200
17
2.
Press and hold down the power button for several 
seconds. The SA200’s sign-on message should appear 
on the screen. You may have to adjust the brightness and 
contrast controls for a clear display. See “LCD Display 
Controls” on page 28.
3.
If you need to run the BIOS Setup program to set or 
modify your system’s configuration, refer to Appendix 
B, “Using the BIOS Setup Program.”
Turning Your Laptop Off
1.
To turn the laptop off, click on the Windows 95 Start 
button (most often found at the lower left corner of the 
screen) and point to Shut Down. A dialog box displays 
giving you these options:
Shut down the computer?
Restart the computer?
Restart the computer in MS-DOS mode?
2.
Click Yes to shut down the laptop.
3.
Wait until the system powers down and then lower the 
display. Gently press the top of the laptop to fasten the 
open/close latch.
Resetting Your System
Occasionally, you may need to reset your system if you encounter 
a hardware or software problem that locks up your laptop. Follow 
these instructions to reset your system:
1.
From Windows 95, press <Ctrl+Alt+Del>.
Never turn your laptop off suddenly! 
Instead, close all programs and use the 
Windows 95 Shut Down command before 
turning your laptop off.
Always wait at least 5 seconds after turning 
the laptop off before turning it back on!
lonestar.boo : sa200.fm  Page 17  Friday, March 6, 1998  10:53 AM