Hauppauge WinTV HVR-1800 TV Tuner PCIe Capture Card WinTV HVR-1800 Manuel D’Utilisation
Digital QAM and Analog TV. You cannot chose both Digital ATSC and Digital QAM.
N
ote: If you’d like to use the A/V inputs, please see instructions below
in External audio/video sources.
If your TV source is ATSC digital over-the-air TV
Select
Digital ATSC
and click
Next
. In the ATSC Setup menu, click
Next
. You
will see the Digital ATSC
Scan scanning for digital
over-the-air channels.
Scan scanning for digital
over-the-air channels.
The digital TV scanning
process will scan from chan-
nels 2 to 51. As TV chan-
nels are found, they will
appear in the Channel box.
process will scan from chan-
nels 2 to 51. As TV chan-
nels are found, they will
appear in the Channel box.
When complete, click
Next
/
Next
and
OK
.
N
ote: if you do not
receive any ATSC
receive any ATSC
digital TV channels, an
antenna signal booster might be needed. After adding a signal booster,
see below for instructions on rescanning and the Troubleshooting section
for information on choosing an antenna.
antenna signal booster might be needed. After adding a signal booster,
see below for instructions on rescanning and the Troubleshooting section
for information on choosing an antenna.
If your TV source is Clear QAM Digital Cable TV
Clear QAM digital cable TV
channels are those TV chan-
nels broadcast on a digital
cable network which are unen-
crypted (‘free to view’). If you
are using cable TV with clear
QAM programs, chose
channels are those TV chan-
nels broadcast on a digital
cable network which are unen-
crypted (‘free to view’). If you
are using cable TV with clear
QAM programs, chose
Digital
QAM
and
Next
.
QAM channels which are
detected but are encrypted
are automatically not selected.
The resulting channels in the
detected but are encrypted
are automatically not selected.
The resulting channels in the
page 3