Grandstream Networks TV Converter Box HT386 Manuel D’Utilisation
Grandstream Networks, Inc.
HT-386 User Manual
Page 10 of 34
Firmware 1.0.3.64
Last Updated: 2/2007
B
ASIC
O
PERATIONS
G
ET
F
AMILIAR WITH
V
OICE
P
ROMPT
The HT–386 has a stored voice prompt menu for quick browsing and simple configuration. Currently, the
voice prompt menu and the LED button is designed for FXS Port 1 ONLY.
To enter this voice prompt menu, press the LED button or press “***” from the analog phone.
voice prompt menu and the LED button is designed for FXS Port 1 ONLY.
To enter this voice prompt menu, press the LED button or press “***” from the analog phone.
T
ABLE
4:
HT-386
IVR
M
ENU
D
EFINITIONS
Menu
Voice Prompt
Options
Main Menu
“Enter a Menu Option”
Press “*” for the next menu option
Press “#” to return to the main menu
Enter 01-06, 47, 86, 99 menu options
Press “#” to return to the main menu
Enter 01-06, 47, 86, 99 menu options
01
“DHCP Mode”,
“Static IP Mode”
“Static IP Mode”
Press “9” to toggle the selection
If using “Static IP Mode”, configure the IP address
information using menus 02 to 05.
If using “Dynamic IP Mode”, all IP address information
comes from the DHCP server automatically after reboot.
If using “Static IP Mode”, configure the IP address
information using menus 02 to 05.
If using “Dynamic IP Mode”, all IP address information
comes from the DHCP server automatically after reboot.
02
“IP Address “ + IP address
The current WAN IP address is announced
If using “Static IP Mode”, enter 12 digit new IP address.
If using “Static IP Mode”, enter 12 digit new IP address.
03
“Subnet “ + IP address
Same as menu 02
04
“Gateway “ + IP address
Same as menu 02
05
“DNS Server “ + IP address
Same as menu 02
07
Preferred Vocoder
Press “9” to move to the next selection in the list:
• PCM U / PCM A
• G.723
• G.723
• G.729
• G.726
• iLBC
• iLBC
12
WAN Port Web Access
Press “9” to toggle between enable / disable
13
Firmware Server IP
Address
Address
Announces current Firmware Server IP address. Enter
12 digit new IP address.
12 digit new IP address.
14
Configuration Server IP
Address
Address
Announces current Config Server Path IP address. Enter
12 digit new IP address.
12 digit new IP address.
15
Upgrade Protocol
Upgrade protocol for firmware and configuration update.
Press “9” to toggle between TFTP / HTTP
Press “9” to toggle between TFTP / HTTP
16
Firmware Version
Firmware version information.
17
Firmware Upgrade
Firmware upgrade mode. Press “9” to toggle among the
following three options:
following three options:
- always check
- check when pre/suffix changes
- never upgrade