Gigabyte GA-965P-DQ6 Manuel D’Utilisation

GA-965P-DQ6 Motherboard

- 18 -

The e-SATA cable kit includes one SATA bracket,
one SATA signal cable, and one SATA power cable.

SATA Bracket

SATA Power Cable

SATA Signal Cable

Step 1:
Locate one free PCI
slot and secure the
SATA bracket to the
chassis back panel
with a screw.

Follow the steps below to install the e-SATA cable kit:

Step 2:
Connect the SATA
c a b l e   f r o m   t h e
bracket to the SATA
p o r t   o n   y o u r
motherboard.

Step 3:
Connect the power
c a b l e   f r o m   t h e
bracket to the power
supply.

Step 4:
Plug one end of the
SATA signal cable into
the e-SATA connec-
tor on the bracket.
Then attach the SATA
power cable to the
power connector on
the bracket.

e-SATA

Connector

Power

Connector

e-SATA

Connector

The e-SATA cable kit allows you to connect external SATA device(s) to your system by expanding the
internal SATA port(s) to the chassis back panel.

• Turn off your system and the power switch on the power supply before installing or

removing the SATA bracket and SATA power cable to prevent damage to hardware.

• Insert the SATA signal cable and SATA power cable securely into the corresponding connec-

tors when installing.

Step 5:
Connect the other ends of the SATA signal cable and SATA power cable
to your SATA devices. For SATA device in external enclosure, you only
need to connect the SATA signal cable. Before connecting the SATA signal
cable, make sure to turn off the power of the external enclosure.