GE UV-1 Manuel D’Utilisation
2. General Description
Rear panel controls
Fig. 4.
Optical unit. Rear panel.
No. Item
Description
6
Locking knob
The cell holder is in locked position when the locking
knob is turned fully in the direction of the arrow
knob is turned fully in the direction of the arrow
7
Filter inlet
Filters, converters or apertures are inserted in the
positions indicated. When inserting them, align
positions indicated. When inserting them, align
8
Converter or
the arrowhead on the end of the filter or converter
Aperturewith the arrowhead next to the appropriate
opening. Filters, converters and apertures must be
pressed fully
Aperturewith the arrowhead next to the appropriate
opening. Filters, converters and apertures must be
pressed fully
9
Support rod
Enables the optical unit to be mounted on laboratory
scaffolding. The rod may be secured in either of two
positions by a screw and a guide-pin
scaffolding. The rod may be secured in either of two
positions by a screw and a guide-pin
10
Support rod
Alternative position for support rod
11
Multi-core cable
Connects the optical unit to the control unit via
an 11-pin plug with a snap-lock. For disconnection
squeeze the ribbed sides of the plug firmly and pull
an 11-pin plug with a snap-lock. For disconnection
squeeze the ribbed sides of the plug firmly and pull
Warning:
The optical unit contains a UV-source which is exposed
if the cover is removed.
8
9
Guide pin
Screw
7
10
8
6
11