GE General Electric Automobile Electronics design line 5-button key fob Fascicule

466-2295A • November 2007

Copyright © 2007, GE Security Inc.

This is the GE DesignLine 5-Button Keyfob Installation Instruc-
tions for model TX-4015-01-2. The keyfob enables you to turn 
the system on before exiting and off before entering the home or 
to turn on the siren and call the central monitoring station if there 
is an emergency. If lamp modules have been installed, you can 
use the keyfob to turn system-controlled lights on or off.
The keyfob is a lithium coin battery-powered, wireless keyfob 
designed to fit on a keychain, in a pocket, or in a purse. It 
provides a convenient option for the following system           
operations:

• Arm the system (doors, windows, and motion sensors).
• Arm the system with no entry delay (if programmed).
• Disarm the system.
• Trigger panic alarms.
• Turn system-controlled lights on or off.
• Open the garage door (if programed).

Refer to your control panel documentation for instructions on 
programming and sensor testing your keyfob. Use the following 
guidelines to add keyfobs to the system:

• Program (learn) the keyfobs into the control panel as unsu-

pervised sensors.

• Each learned keyfob uses one of the available zones.
• Use sensor group number 01, 03, 06, or 07 (all Concord, 

Simon 3, and Simon XT panels only).

The keyfob buttons (Figure 1) should operate as follows:

Unlock button.  Disarms the control panel. The doors, 
windows, and motion sensors are disarmed.

Lock button.  The following key presses will depend on 
your control panel configuration.

• If pressed once, the control panel arms doors and 

windows (stay mode).

• If pressed twice, the control panel arms motion 

sensors, doors, and windows (away mode) (all 
Concord, Simon 3, and Simon XT panels only).

• If pressed three times, the control panel activates the 

latchkey feature if programmed (all Concord, Simon 3, 
and Simon XT panels only).

Lock and Unlock buttons.  If the keyfob is programmed 
(learned) as a panic or portable auxiliary group number, 
when you press the Lock and Unlock buttons simulta-
neously, the keyfob will activate alarm reports to the central 
station. Depending on the group number, it may activate an 
audible or silent alarm.

Light button.  For all Concord, Simon 3, and Simon XT 
panels, it toggles system-controlled lights on/off. For 
NetworX panels the default is stay, but it can be changed to 
operate a relay.

Star button.  For all Simon 3 and Simon XT panels, if used 
with the X-10 universal module, the control panel will cause 
the garage door to open or close. For NetworX panels it 
performs the same function as pressing the Star button on 
the keypad and may be programmed to operate a relay.

Flashlight button.  Press this button to activate the LED 
flashlight.

This device complies with part 15 of the FCC rules. Operation is subject to the 

following conditions: 
1. This device may not cause harmful interference. 
2. This device must accept any interference received, including interference 

that may cause undesired operation. 

Changes or modifications not expressly approved by the party responsible for 

compliance could void the user’s authority to operate the equipment. 
FCC ID: B4Z-TX-4015-01
Industry Canada ID: 1175C-TX401501

Battery

Panasonic CR2032 3 VDC, 225 mAh, lithium 

coin battery (5-year typical battery life)

Transmitter frequency

319.508 MHz (crystal controlled)

Transmitter frequency tolerance ± 8 kHz
Transmitter bandwidth

24 kHz

Modulation type

Amplitude shift key (ASK)

Unique ID codes

16 million

Peak field strength

Typical 40,000 uV/m at 3m

Operating temperature

32 to 120°F (0 to 49°C)

Enclosure

ABS PA-765

Weight

0.61 oz. (17 g)

Dimensions  (WxHxD)

1.26 x 2.35 x 0.53 in. (3.20 x 5.97 x 1.35 cm)

Color

Black

Toll-free: 888.GESECURity (888.437.3287 in the US, including Alaska and Hawaii; Puerto Rico; Canada). 

Outside the toll-free area: Contact your local dealer.