Exabyte EXB-8505 8mm Manuel D’Utilisation
The mounting holes accommodate M3
×
0.5
×
6 mm screws and are
designed for standard 5.25-inch half-high form factor mounting
requirements. The holes are 0.31 inches (7.9 mm) deep.
requirements. The holes are 0.31 inches (7.9 mm) deep.
Figure 4-4 shows the dimensions for the tape drive’s mounting holes.
Figure 4-4 Mounting hole dimensions in inches (and millimeters)
May 1994
EXB-8205 and EXB-8505
4-5
(Standard and XL)
4 Requirements for Use