Escient EWP-2000 V2 Mode D'Emploi

Please review the following material carefully. Failure to follow the 

instructions, or failure to heed the warnings contained herein could lead to 

serious injury.

The following are special precautions you should take when using and handling 

batteries.

•  Do not expose batteries to direct sunlight or extreme heat

•  Do not submerge batteries in liquid

•  Do not incinerate batteries

•  Do not handle damaged or leaking battery packs

•  Do not attempt to discharge batteries by short-circuiting them

•  Do not attempt to charge batteries with a charger other than one approved 

for use with EWP-2000 V2

•  Do not leave or operate the EWP-2000 V2 or EWP-2000 V2 batteries 

in an excessively hot environment such as a closed vehicle under hot 

sunshine or beside a fire, heater, or blow dryer. Do not leave EWP-

2000 V2 exposed to excessive heat for any period of time. Excessive 

heat exposure may result in melting, or cause the electronics/battery to 

overheat resulting in fire.

•  Use only the supplied batteries and AC Adapter. Failure to follow this 

instruction may result in battery burst or liquid leak, and may cause fire, 

or injury.

•  Store and Dispose of all batteries in accordance with the instructions 

contained herein. Never dispose of the battery by burning. Any such 

action may result in excessive heating, explosion, or fire.

•  Do not disassemble, modify, puncture, or strike any battery with force or 

allow batteries to become wet. Any such action may result in excessive 

heat, explosion, or ignition.

•  If at anytime the EWP-2000 V2 batteries should smell, heat up, become 

discolored, leak fluid, change shape, or experience an abnormal 

occurrence, remove the battery from the EWP-2000 V2 and do not use it.

•  Should leaking fluid from the battery make contact with skin, eyes or 

clothes, flush immediately with water. If there is contact with eyes, seek 

medical treatment immediately. Failure to follow these instructions may 

result in skin rash or significant eye damage.

Replace only with the same type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer’s instructions.

Unwanted lithium ion battery packs may be returned to the battery 

manufacturer for disposal.

Dismantling or opening the case will void warranty and may

possibly cause electric shock. Avoid wet environments

It is important to properly care for your EWP-2000 V2 wireless panel. Follow 

these guidelines to ensure your device is preserved and protected.

•  Avoid scratching the screen by always using the supplied stylus or a 

plastic-tipped pen intended for use with touch sensitive screens.

•  Do not expose EWP-2000 V2 to rain, liquids or moisture for an extended 

period of time.

•  Do not expose EWP-2000 V2 to temperature extremes.

•  Do not place any objects on top of the EWP-2000 V2 to prevent screen 

damage.

•  Clean EWP-2000 V2’s screen with a soft cloth moistened only with water.

•  Avoid exposing your EWP-2000 V2 wireless panel to magnetic detectors 

and security magnetic wands. X-ray screening devices should not harm 

the EWP-2000 V2.

•  Place the EWP-2000 V2 in a protective case and take it with your carry-

on luggage if traveling by airplane.

•  Make sure to disconnect all peripheral devices.

•  As the device may still emit radio waves even when you are working 

offline, do not use the EWP-2000 V2 while on an airplane.

•  Operating Temperature: 0-40 degrees Celsius

•  Humidity: 0-90%

Escient®, the Escient logo, and FireBall® are trademarks of Digital Networks 

North America. 

FireBall EWP-2000 V2 and Physital are trademarks of Escient®.

Other product names mentioned herein are used for identification purposes only 

and may be trademarks of their respective companies.