Escient MP-100 Manuel D’Utilisation

P

AGE

 100

F

IRE

B

ALL

-MP I

NSTALLATION

 & U

SER

’

S

 G

UIDE

 - M22002-01A1

C

HAPTER

 8 - C

USTOMIZING

 F

IRE

B

ALL

-MP

Using FireBall-MP with the Elan VIA! system is quite easy. You can use Elan System 
Controllers or direct VIA! touch panel connections. FireBall-MP uses a special screen 
overlay to provide VIA! touch panels with the required control points. You will need to 
have the latest VIA! Tools. Please contact Elan for more information.

1) Route the IR output of the VIA panels to either the direct IR port of the FireBall-MP 
(recommended) or use an emitter on the front of the FireBall-MP (IR receiver is located 
on the right hand edge of the display window.
2) Connect the video out of FireBall-MP to the VIA panel.
3) Using new version of VIA tools, select custom overlay template, and choose FireBall-
MP as a component in the VIA panel

1) Press SETUP->AUDIO VIDEO AND COM PORTS-> COM PORT SETTINGS.
2) Navigate to the IR FRAME button and press the SELECT key until the button is set to 
ENABLE
3) Navigate to the SAVE button and press the SELECT key.
4) Press SETUP to exit the setup menus. The Elan VIA! IR frame should now be visible 
on all video outs. Make sure the FireBall-MP video is being routed to the VIA panels.