Epson TP1 Manuel D’Utilisation

Operation  2. TEACH Mode

 

 

TP1  Rev.5 

33 

  

2.1.3  Specifying Jog Speed 

Press the <Speed> key and select the speed at [Speed]. (Low, High) 

Low 

: Low jog speed 

High 

: High jog speed 

 

2.1.4  Executing Step Jog 

By step jog operation, the robot moves when the Jog key is pressed.   
Set the distance that the robot moves beforehand. 

(1)

  Press the <Jog Dist> key and select the distance at [Jog Dist].   

Long 

: Long jog distance 

Medium : Medium jog distance 
Short 

: Short jog distance 

(2)

  To execute step jog, grip the Jog key with the enable switch held down. 

 

2.1.5  Executing Continuous Jog 

With continuous jog, the robot moves continuously while the Jog key is held down. 

(1)

  Press the <Jog Dist> key and select “Cont Jog” at [Jog Dist].   

(2)

  To execute continuous jog, grip the enable switch while pressing the Jog key. 

 

2.1.6  ON/OFF 

Specify On/Off for each joint. 
When performing direct teaching (manually moving the robot by hand to perform 
teaching), set the joint to Off.   
Press the <Jog Dist> key and select “Free Joint” at [Jog Dist].   
 
Set On/Off for each joint.   

<+> key  : Lock 

: Sets the joint to Off.

   

<

−> key  : Free 

: Sets the joint to On.

 

<F2> key  : All Lock  : Sets all joints to Off.   

<F3> key  : All Free  : Sets all joints to On.