Epson P-5000 Manuel D’Utilisation

Epson P-3000/P-5000

9/06

Epson P-3000/P-5000

 - 

13

You can copy photos, videos, and music from your computer 
to the viewer. For instructions on copying music, see page 10.

WMV files are automatically converted to MP4 when they are 
transferred, and videos that exceed 2GB are automatically 
divided into multiple files. 

1. Connect the viewer to your computer as described on 

page 10. 

2. Double-click the 

 

Epson Link2

 icon on your desktop to 

open the program. 

3. Select 

Photos, Videos

, or 

Music

, depending on the type of 

files you want to transfer.

4. Select the files to transfer in the Computer window, then 

click the 

 down arrow in the center of the screen. The 

files are transferred to the viewer.

Note: You can also transfer files by dragging and dropping them 
into the lower contents window. For more information, click the 

?

 in the upper right corner of the Link2 screen.

5. When you are finished transferring files between your 

computer and the viewer, make sure you disconnect the 
viewer as described on page 11.

You can connect a flash memory drive or other USB device to 
your viewer and copy files to or from the device.

The viewer supports devices that are compatible with the USB 
Mass Storage specification, including:
❏ Digital cameras
❏ Flash memory drives
❏ Memory card readers
❏ External hard drives
❏ Epson multimedia storage viewers

Note: USB hubs are not supported, and some USB devices may not 
work without a power connection. Epson cannot guarantee the 
compatibility of any device.

Before you connect a USB device, connect the AC adapter to 
the viewer and plug it in if possible. If your USB device has an 
AC adapter, use it to prevent the possible loss of files during 
transfer.

1. Open the connector cover on the side of the viewer. 

2. Plug the device into the 

Host

 USB connector on the side of 

the viewer.

If the device has a USB cable, connect one end of the cable 
to the device and the other end to the 

Host

 USB connector 

on the viewer.

Note: To prevent a possible malfunction, do not use both USB 
connectors on the viewer at the same time.

3. Turn on the viewer and the USB device if necessary.

After you connect a USB device, you can copy all the files to 
the viewer, or select individual files to copy. 

1. On the Home screen, use the 4-way ring to highlight 

USB 

Device

, then press 

OK

. You see the USB Device menu:

2. Do one of the following:

❏ To copy all files, select 

Backup USB device to Viewer

, 

then press 

OK

. The files are copied to a folder that is 

automatically created in the Backup Files folder on the 
viewer. Skip to step 7.

❏ To copy selected files, select 

Browse USB Device

 in 

the USB Device menu, then press 

OK

. You see your files 

displayed in thumbnail view. Continue with the steps 
below.