Epson BrightLink Pro 1430Wi Collaborative Whiteboarding Solution with Touch Manuel D’Utilisation
• If you must set addresses manually, turn off DHCP and enter the projector's IP Address, Subnet
Mask, DNS server, WINS server,and Gateway Address as needed. When manually entering IP
Settings, you cannot use restricted IP addresses.
Settings, you cannot use restricted IP addresses.
Note: To highlight the numbers you want from the displayed keyboard, press the arrow buttons on
the remote control. To select a highlighted number, press Enter. Or, press and hold the Num button
on the remote control while entering the desired numbers.
the remote control. To select a highlighted number, press Enter. Or, press and hold the Num button
on the remote control while entering the desired numbers.
10. To prevent display of the IP address on the standby screen, turn off IP Address Display.
11. When you finish selecting settings, select Complete or Setup Complete and follow the on-screen
instructions to save your settings and exit the menus.
Parent topic:
Related references
Restricted IP Addresses
When manually entering IP Settings, you cannot use certain ranges of IP addresses:
Setting
Restricted IP addresses
IP Address
0.0.0.0
127.x.x.x
192.0.2.x
224.0.0.0 to 255.255.255.255
Subnet Mask
0.0.0.0
255.255.255.255
Gateway Address
0.0.0.0
197.x.x.x
224.0.0.0 to 255.255.255.255
DNS Server
127.x.x.x
192.0.2.x
224.0.0.0 to 255.255.255.255
87