Epson BrightLink Solo Interactive Module (IU-01) Guide D’Installation Rapide
2
Safety Instructions
•
Installation of the product on the wall should be performed by qualified technicians using only
approved mounting equipment.
approved mounting equipment.
•
Incomplete or incorrect installation could cause the product to fall and cause personal injury or prop-
erty damage.
erty damage.
•
If you apply adhesives to prevent the screws from loosening, or if you use lubricants or oils on the wall
plate, the housing may crack and cause the product to fall, resulting in personal injury or property
damage.
plate, the housing may crack and cause the product to fall, resulting in personal injury or property
damage.
•
Handle the USB cable carefully to avoid fire or electric shock. Observe the following precautions when
handling:
handling:
Do not handle the cable with wet hands.
Do not use a cable that is damaged or modified.
Do not pull the cable with too much force when routing it or connecting it to a computer.
•
Do not hang on the arm or hang a heavy object on it.
•
If the product or wall plate falls, it could cause personal injury or property damage.
•
When you mount the product on the wall with the wall plate, the wall requires enough strength to
hold the product and the wall plate. Confirm the weight of the product and the wall plate before
installation, and maintain the strength of the wall. If the wall is not strong enough, reinforce the wall
before installation.
hold the product and the wall plate. Confirm the weight of the product and the wall plate before
installation, and maintain the strength of the wall. If the wall is not strong enough, reinforce the wall
before installation.
•
Do not install the product in a location where there is excessive humidity or dust, near cooking or heat-
ing appliances, or in a location exposed to smoke or steam. Fire or electric shock may result.
ing appliances, or in a location exposed to smoke or steam. Fire or electric shock may result.
•
Do not install the product in a location where it might be exposed to vibration or shock, which could
cause damage to the product or mounting surface. It could also cause the product to fall, resulting in
personal injury or property damage.
cause damage to the product or mounting surface. It could also cause the product to fall, resulting in
personal injury or property damage.
•
Tighten all screws firmly after adjustment. Otherwise, the product or wall plate may fall and cause per-
sonal injury or property damage.
sonal injury or property damage.
•
Never loosen the bolts and nuts after installation.
•
Confirm on a regular basis that the screws have not become loose. If you find any loose screws, tighten
them firmly. Otherwise, the product or wall plate may fall and cause personal injury or property dam-
age.
them firmly. Otherwise, the product or wall plate may fall and cause personal injury or property dam-
age.
•
Follow the instructions in this guide when installing the wall plate. Otherwise, the wall plate may fall,
resulting in personal injury or property damage.
resulting in personal injury or property damage.
•
Do not use excessive force when adjusting the product. Otherwise, the product may cause personal
injury.
injury.