Enfora GSM0110 Manuel D’Utilisation
Network Status (Link) LED Description
LED
Color
LED
Color
LED Status
Connection Status
Green
Continuous Blinking Searching for Network
Green
Single Blink
Connected to GSM Network
Green Double
Blink
Transmitting/Receiving
Data
Red
Single Blink
New SMS received
Single Blink – One short blink very 6 seconds
Double Blink – Two blinks every 6 seconds
Installing and removing the SIM
You need to use a SIM (Subscriber Identity Module) card with your GSM0110 Compact
Flash Card to allow mobile communication through GSM or GPRS networks. A SIM
card can be purchased from a variety of GSM/GPRS network carriers. The GSM/GPRS
carrier can enable your SIM for voice calls, data sessions or both.
To install a SIM Card:
Position the GSM0110 CF modem so that the SIM cardholder is facing up and the
antenna is located farthest from you.
Position the SIM card with the gold contacts down and the notched corner positioned in
the upper right hand corner.
Gently slide the SIM card all the way into the slot from right to left.
Installing and removing the SIM
You need to use a SIM (Subscriber Identity Module) card with your GSM0110 Compact
Flash Card to allow mobile communication through GSM or GPRS networks. A SIM
card can be purchased from a variety of GSM/GPRS network carriers. The GSM/GPRS
carrier can enable your SIM for voice calls, data sessions or both.
To install a SIM Card:
Position the GSM0110 CF modem so that the SIM cardholder is facing up and the
antenna is located farthest from you.
Position the SIM card with the gold contacts down and the notched corner positioned in
the upper right hand corner.
Gently slide the SIM card all the way into the slot from right to left.
GSM0110UG001
Page
4