Emerson 5500 SERIES Manuel D’Utilisation

File Management Utilities                                                              Thin Web Server 

 

 

5-2 

 

 

CAUTION 

to delete in the following procedure. 

 

 9. To start the file delete process click the Delete button 

once. A DOS window opens. Let the process complete; 
do not interrupt it. When finished, the DOS window will 
close (with a series of beeping sounds). 

10. When finished, click the Cancel buttons to return to the 

main screen. On the menu bar click Communication 
then Disconnect from the Server. 

11. Reset the TWS.  Insert a pin or paper clip into the hole 

marked RESET (top center); or disconnect power supply 
plug to the TWS for 15 seconds, then reconnect it.. 

 

1.  The computer must be connected to the same network as 

the TWS. See Section 6, How to create an Ethernet TCP/IP 
network connection (select either Windows 2000 or XP). 

2.  Double click the icon on the Windows desktop to start the 

TWS software. On the menu bar 
click  Communication, then select 
Connect to the Server.  When TWS 
is connected the bottom right corner 
light turns green Server Connected.  

On menu bar click Utilities then FTP Utility. 

 

3.  Click the Start Internet Session button (top left) once. 

Type the TWS IP Address in the FTP Server Name text 
box. Type the username and password listed below:  

username: guest  password: guest 
username: asco  password: asco 

NOTE: Select the Passive FTP syntax checkbox   . 

 

4.  Click  Connect to start connection to the TWS FTP 

server. Once connected, the screen left pane shows the 
current TWS directory resources. The right pane shows 
your local computer directory resources. 

 

5.  To transfer a file from the TWS to the local computer, 

locate and select the file from the TWS directory listing 
(file will be highlighted). Next, on the local directory 
list, locate the parth and directory you want the file to be 
copied to. Then select the Ascii option button for a text 
file, or select the Binary option button for all other files. 
Now, click the  Get  button to start the transfer. 

 

6.  To transfer a file from the local computer to the TWS, 

locate and select the file from your local computer 
directory listing (file will be highlighted). Next, on TWS 
directory list, locate the path and directory you want the 
file to be copied to. Then select the Ascii option button 
for a text file, or select the Binary option button for all 
other files. Click the  Put  button to start the transfer. 

 

7.  To delete a file from the TWS directory, follow a similar 

procedure (as above), but click the  Delete  button once. 
This applies to the TWS directory. 

 

8.  When finished, click the  Disconnect  button, click the 

the  Close Internet Session  button, then close window.