Emerson 5500 SERIES Manuel D’Utilisation

Client Settings                                                                              Thin Web Server 

 

 

8-2 

 

 

5.  Install Internet Protocol by clicking on Install button.  

If already installed highlight Internet Protocol (TCP/IP) 
and click on Properties. 

 

6.  If your PC is on the company network contact your IT 

personnel for appropriate settings. If you are connecting 
to an ISP using DSL or cable modem contact your service 
provider for the settings. 
 

7.  If you have created a dedicated local area network to 

connect to the Thin Web Server this is where you have to 
enter a unique IP number for your PC.  For example if  
 
Thin Web server IP configuration is:  
IP no.  : 169.254.001.002 
Subnet: 255.255.255.0 
Gateway: 0.0.0.0 

 

Computer IP configuration will be:  
IP no.  : 169.254.001.003 
Subnet: 255.255.255.0 
Gateway: 0.0.0.0 

 
 

Note: 
Once the TCP/IP setup is complete at the PC it is 
preferred to re-boot the PC.  
 
 
 
 
 

8.  To verify if the Ethernet connection between the PC and 

the Thin Web Server is working click on the following: 

 

 
On the command prompt type:  
                                             C:\ >ping 169.254.001.002 

 

(If IP address of the Thin Web server is as listed in the 
example otherwise replace it with the new assigned one).  
 

9.  To see the PC’s IP settings type:   C:\>ipconfig 

 
Note:  
The network administration determines the IP Address 
numbers and Subnet Mask numbers.