Emerson DECT 6.0 EM6113 Manuel D’Utilisation

4

Modular Telephone 

Line Jack

To use this phone, you must have an RJ11C modular telephone 

jack.  If you do not have a modular jack, please call your local 

telephone company to find out how to get one installed.

Your cordless phone uses a digital security system to protect against false ringing, 

unauthorized access, and charges to your phone line.

 Some cordless telephones operate at frequencies that may cause 

or receive interference with nearby TVs, microwave ovens, and VCRs. To minimize or 

prevent such interference, the base of the cordless telephone should not be placed near 

or on top of a TV, microwave ovens, or VCR. If such interference continues, move the 

cordless telephone farther away from these appliances.

Certain other communications devices may also use the 1.9 GHz frequency for communi-

cation, and, if not properly set, these devices may interfere with each other and/or your 

new telephone.  If you are concerned with interference, please refer to the owner’s 

manual for these devices on how to properly set channels to avoid interference. Typical 

devices that may use the 1.9 GHz frequency for communication include wireless 

audio/video senders, wireless computer networks, multi-handset cordless telephone 

systems, and some long-range cordless telephone systems.      

 

●  Base (x1)

●  AC power adaptor (x3)

●  Handset Charging unit (x2)

●  Handset (x3)

●  Handset battery pack (x3)

●  Battery compartment cover (x3)

●  Line cord (x1)

●  User guide (x1)

●  Avoid sources of noise and heat, such as motors, fluorescent lighting, microwave

    ovens, heating appliances and direct sunlight.

●  Avoid areas of excessive dust, moisture and low temperature.

●  Avoid other cordless telephones or personal computers.

●  Never install telephone wiring during a lightning storm.

●  Never install telephone jacks in wet locations unless the jack is specifically designed for

    wet locations.

●  Never touch uninsulated telephone wires or terminals, unless the telephone line has

    been disconnected at the network interface.

●  Use caution when installing or modifying telephone lines.  

19

●  Answering system memory may be full.  Erase some messages.

●  You may have accidently pressed the play/stop button during playback and 

stopped the message.
Won’t respond to remote commands

●  You must use a tone-dial phone.  This phone does not support pulse

    (rotary) dialing.

●  Make sure to enter the correct security code.

●  Did unit hang up?  If you take no action for a period of time, it automatically

    hangs up.

●  Aluminum siding.

●  Foil backing on insulation.

●  Heating ducts and other metal construction that can shield radio signals.

●  You’re too close to appliances such as microwaves, stove, computers, etc.

●  Atmospheric conditions, such as strong storms.

●  Base is installed in the basement or lower floor of the house.

●  Base is plugged into AC outlet with other electronic devices.

●  Baby monitor is using the same frequency.

●  Handset battery is low.

●  You’re out of range of the base.

To keep your unit working and looking good, follow these guidelines:

●  Avoid putting the phone near heating appliances and devices that generate

    electrical noise (for example: motors  or fluorescent lamps).

●  DO NOT expose to direct sunlight or moisture.

●  Avoid dropping the unit and/or other rough treatment.

●  Clean with a soft cloth.

●  Never use a strong cleaning agent or abrasive powder because this will

    damage the finish.

●  Retain the original packaging in case you need to ship it at a later date.

●  Periodically clean the charge contacts on the handset and base with a soft

    cloth.