Emerson N410C Manuel D’Utilisation

Maintenance and Service Guide

Removal and Replacement Procedures

7. Turn the base enclosure top side up with the rear panel facing 

forward.

8. Remove the TM2.0 × 6.0 screw 1 that secures the left display 

support to the base enclosure (Figure 5-31).

✎

The left display support is included in the Miscellaneous Plastics 
Kit (spare part number 231454-001).

9. Remove the left display support 2.

10. Remove the two HM5.0 × 9.0 screwlocks 3 that secure the 

external monitor connector to the base enclosure.

11. Remove the six TM2.0 × 4.0 screws 4 that secure the system 

board to the base enclosure.

✎

Evo Notebook N410c models have an additional TM2.0 × 3.5 
screw 5 that must be removed.