Emerson Transmitter 350 Mode D’Emploi

4. Remote Mount Electronics Option.  Due to 

process temperature, vibration or accessibility 

the housing/electronics of the LTM transmitter 

can be remote mounted as far as 25 ft.  The 

housing/electronics are supplied with a pipe-

mount bracket that can be mounted most 

nearby posts or pipes with hose clamps.  The 

drawing below depicts a gage mounted 

transmitter in the top mount remote electronics 

configuration.

Figure 12.  Gage mount transmitter in the top mount remote 

electronics configuration.

level gage.  This will overheat the sensor probe 

and cause failure.

NEVER bend, bow or cause a kink in the 

sensor probe, this will damage the instrument 

and void the warranty.  Do not attempt to 

straighten the sensor probe, this will not help 

the instrument work.  If the shipment arrives 

damaged please file a claim with the shipping 

company and contact the factory to arrange for 

a replacement.

There are a variety of ways to install a 

standalone transmitters (i.e. crane, lift, etc…), 

the basic rule to remember when installing an 

LTM transmitter is DO NOT DAMAGE the 

sensor probe, this will void the warranty.  If 

damage is suspected please contact the factory 

and be prepared to provide pictures.

In REMOTE MOUNT electronic options 

please support the sensor probe at the 

elbow/condulet and then every 3 feet 

(depending on length of cable).  Support at 

every 2 feet may be required if explosion proof 

conduit is utilized by the end user.

9