Emerson Avocent HMX Digital High Performance KVM Switch Guide De Montage

 Chapter 3: Operations        59

4. Type the number that corresponds to the audio setting you wish to apply and press Enter.

NOTE: If you choose off, audio support will be disabled.

5. To confirm your selection and exit the screen, type 0 (zero) and press Enter. The unit resets 

after you press Enter.

By accessing the HMX Manager appliance, you can set and display the power saving mode feature.

1. From the serial menu, press 1 to access the Receiver Main Menu and press Enter. If the 

password option is enabled, you will be prompted for a password. Press 8 to access the 
Console Settings Menu and press Enter. The current Power Saving configuration is displayed. 

2.

Press 8 to choose Display Power Saving Mode, then press Enter. The Display Power Saving 
Mode Menu will appear.

3. Enter the number representing the desired mode from the menu. 
4. To confirm your selection and exit the screen, type 0 (zero) and press Enter.

If there is no keyboard or mouse activity for an amount of time greater than the value set in the 
Auto Logout Timeout, the user station will automatically disconnect from the transmitter and log 
off from the HMX Manager.

1. From the serial menu, press 1 to access the Receiver Main Menu and press Enter. If the 

password option is enabled, you will be prompted for a password. Press 8 to access the 
Console Settings Menu and press Enter. The current session Auto logout is displayed beside 
menu item 9.